English
Hand pallet truck with scale
F8.1.16/004
Subject to change without notice
page 13
Battery loading
The battery symbol at the lower left of the display is used to indicate low battery power.
When the cursor is “on” above the battery symbol, change the batteries as soon as possible.
The rechargeable monoblock (Battery) 12 V/4 must be recharged immediately with attached battery charger.
The device can be used also in a steady state.
To prevent damage of the battery-capacity, the pallet truck can be connected with cable (not included in the
delivery) to a power outlet with 230 Volts.
A dismounting of the monoblock is not required.
Before start-up, please push the green button which is mounted on the side.
Warning:
Disconnect all power to the battery before installing, servicing, cleaning or removing it.
Before connecting or disconnecting any internal electronic components or interconnecting wiring
between electronic equipment, always remove power and wait at least 30 seconds.
Failure to observe these precautions could result in damage to or destruction of the equipment, or bodily harm.