Petsafe In-Ground Fence ZIG00-14654 Скачать руководство пользователя

Страница: 23 / 32

+1 (800) 732-2677

petsafe.com 23

Days 9–30

Once your pet consistently respects the boundary regardless of

distractions or temptations, he is ready for the next step: unleashed

supervision (

10D

). Stay close by with a leash at hand. Play with your

pet for a while during the first few sessions. If your dog does not

try to cross the boundary, occupy yourself with another task in the

yard, and allow him to freely explore. Continue watching your pet. If

he escapes, remove the collar and lead him back into the Pet Area.

Start these sessions at about 15 minutes and gradually work up to an

hour or more.
When your pet proves trustworthy, you can let him out on his own.

Continue to check on him regularly. You can remove every other

Boundary Flag every 4 days until all the flags are removed. Save

them in case you move or need to train another pet.

Taking Your Pet Out of the Pet Area

Important: Remove the Receiver Collar and leave it at home.

Once your pet learns the boundary, he will be reluctant to cross it for

walks or car rides.

Option 1:

Replace the Receiver Collar with a regular collar. Put your pet in a car
that is within the Pet Area and drive him out of the Pet Area (

10E

Option 2:

Replace the Receiver Collar with a regular collar and leash. Walk your pet out of the Pet Area while giving a command such

as “OK” at a specific place along the boundary (the end of your driveway, sidewalk, etc.). Always leave the Pet Area from

the same spot in your yard with a leash and your pet will associate leaving the Pet Area only on a leash, only at this spot,

and only with a person. You may initially need to convince your pet to leave the Pet Area with a treat and lots of praise.

Note:

You may also carry your pet out of the Pet Area.

Congratulations! You have now completed the training program. You are both ready to enjoy more freedom. Just make

sure to continue to check the tightness of the Receiver Collar and remove it when it is not in use.

10D

10E

Содержание In-Ground Fence ZIG00-14654

































Результаты поиска

Содержание In-Ground Fence ZIG00-14654

Отзывы:

Похожие инструкции для In-Ground Fence ZIG00-14654

Бренды по названию

Популярные бренды

Petsafe In-Ground Fence ZIG00-14654, Руководство по эксплуатации продукта

Результаты поиска

Содержание In-Ground Fence ZIG00-14654

Отзывы:

Похожие инструкции для In-Ground Fence ZIG00-14654

Бренды по названию

Популярные бренды