manualshive.com logo in svg

Petsafe In-Ground Fence ZIG00-14654, Руководство по эксплуатации продукта

Поделиться
Скачать
Petsafe In-Ground Fence ZIG00-14654 Скачать руководство пользователя страница 24

24 

+1 (800) 732-2677

Additional Information

•  Use care when using a weed eater or when digging near the Boundary Wire to prevent damage. 
•  The system should only be used with healthy pets. Contact your veterinarian if you have concerns about the medical 

condition of your pet (medication, pregnant, heart conditions, etc.).

•  The PetSafe

®

 In-Ground Fence

™

 system is for residential use only. 

•  The Static Correction will get your pet’s attention, but will not cause harm. It is designed to startle, not to punish. 
•  Test the Receiver Collar at least once a month to verify that it is functioning properly. Check that it activates at the 

Boundary Wire. Battery life depends upon how often the Receiver Collar is activated.

•  Remove the Receiver collar from your pet when indoors for the comfort of your pet.
•  Never leave the Receiver Collar on your pet for more than 12 consecutive hours.

Accessories

To purchase additional accessories for your PetSafe

®

 In-Ground Fence

™ 

system, contact the Customer Care Center  

or visit our website to locate a retailer near you.

Содержание In-Ground Fence ZIG00-14654

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды