Petsafe In-Ground Fence ZIG00-14654 Скачать руководство пользователя страница 22

Страница: 22 / 32

+1 (800) 732-2677

Day 1

For the first day, start with the collar set to level 1, tone-only.

With your pet on a leash and with his favorite treats on hand,

allow him to explore the Pet Area (

10A

). Allow your pet to

cross the boundary (

10B

) and hear the tone from the collar,

then ask him to come back into the Pet Area (

10C)

and praise

and reward him. Your goal is for your dog to associate being

inside the Pet Area with rewarding experiences. Dogs are

sensitive. Keep your mood upbeat as dogs can understand

when you are happy or upset. Do 2 or 3 training sessions for

about 10-15 minutes each. Do not try to do too much too

quickly. More frequent short sessions are better than less

frequent, longer sessions.

Days 2–4

On days 2 through 4, repeat this process, but with the collar

set to level 2—the mildest Static Correction Level. Closely

observe your pet’s behavior while he is in the Static Correction

Zone (

10B

), and note whether or not your dog responds to

the correction. Indicators of a response are looking around in

curiosity, flicking of the ears or scratching at the collar. If he

does not respond, check the fit of the collar to make sure the

contact points are making contact with his skin. If the collar

is fit correctly and your dog does not respond, then move up

to the next correction level and repeat the process. Do 2 or 3

training sessions for about 10–15 minutes each. Your goal is

for your dog to consistently choose to stay in the Pet Area. If

necessary, add in more days of training before moving on to

the next step.

Days 5–8

On days 5 through 8, retain the collar settings from the last

training session, but stage some distractions to test your dog’s

reliability. The goal is to have your pet stay within the Pet Area

even with new temptations. Start with simple temptations and

work your way up. Some examples are:
• Have a family member cross from inside the Pet Area and

exit it.

• Place a toy outside the Pet Area.
• Have a friend or neighbor walk another pet outside the Pet Area.
Remember to keep your pet on a leash throughout this process while he is still learning the boundary. Also, never coax

your pet to leave the Pet Area.

Be sure the extra collar does not put pressure on the contact points.

10A

10B

10C

Содержание In-Ground Fence ZIG00-14654

































Результаты поиска

Содержание In-Ground Fence ZIG00-14654

Отзывы:

Бренды по названию

Популярные бренды

Petsafe In-Ground Fence ZIG00-14654, Руководство по эксплуатации продукта

Результаты поиска

Содержание In-Ground Fence ZIG00-14654

Отзывы:

Бренды по названию

Популярные бренды