PESA Cheetah 1024x256, Руководство пользователя

Страница: 165 / 235

C
HEETAH
S
ERIES
S
WITCHERS
– C
HAPTER
11
81-9059-0570-0 Rev. C
Proprietary Information of PESA S
WITCHING
S
YSTEMS
, I
NC
. 150
5. Reverse the order for removal of the card.
Dipswitch settings (for information only) are detailed in the specific Chapter
for the chassis configuration that you have.
These dip switches are set at the factory. Do not change the settings!
11.5 O
UTPUT
M
ONITOR
C
ARD
11.5.1 Output Monitor Card Overview
The Output Monitor Card (see Figure 66) controls Output Monitor Connectors 1 and 2 located on the
back (lower right) of the Cheetah. You will generally use the connectors for quality assurance or to
troubleshoot specific outputs. Using the 3500ProControl software, you can select specific outputs to
monitor.
FIGURE 66: Output Monitor Card
The Output Monitor Card is internally strobed to “33”, which will be automatically offset by 32 based
on the Frame strobe setting. For example, if the Frame strobe is set to 10, the internal Output Monitor
Card strobe will be automatically set to 42.