PESA Cheetah 1024x256, Руководство пользователя

Страница: 119 / 235

C
HEETAH
S
ERIES
S
WITCHERS
– C
HAPTER
8
81-9059-0570-0 Rev. C
Proprietary Information of PESA S
WITCHING
S
YSTEMS
, I
NC
. 104
8.6.2 Strobe Switch Functions
Table 18 describes the functions of the various strobe switches for the Cheetah systems:
TABLE 18: Strobe Switch Functions
Rotary
Switch Name
Description
S1 MSB Level Code
S2 LSB Level Code
The level code identifies the matrix level of the router.
This setting accepts 1 to 63 in binary (1 to 3F in
hexadecimal). This setting must match the Strobe setting
in the 3500 Series software (select Configuration >
Component. The Strobe setting is at the bottom of the
window).
S3 MSB Output Offsets
S4 LSB Output Offsets
This strobe is used to offset output origin when frames
are added to the system. This setting accepts 1 to 255 in
binary (1 to FF in hexadecimal). Set this strobe to the
first offset number you want to use in this unit. This
setting must match the Output Offset setting in the 3500
Series software (select Configuration > Component.
The Input Offset displays in the lower section of the
window).
S5
MSB Input Offsets
S6
LSB Input Offsets
This strobe is used to offset input origin when frames are
added to the system. This setting accepts 1 to 255 in
binary (1 to FF in hexadecimal). Set this strobe to the
first input number you want to use for this unit. This
setting must match the Input Offset setting in the 3500
Series software (select Configuration > Component.
The Input Offset displays in the lower section of the
window).
S7 MSB Frame
S8 LSB Frame
Specifies the type of frame the boards are plugged into.
For the Cheetah 512x512 frame, set LSB to 1 and MSB
to 0. For the 1024x256 frame, set LSB to 6 and MSB to
0.
S9 Network (Fans)
Set this at 0 for a four-fan system or 1 for a six-fan
system.
S10 Monitor
Sets the starting output number. Each switch position
increments the output number by 4. If you are not using
this feature, leave the level code at zero. If you need to
specify a monitor output, add 32 to the Level Code
value. Use the resulting number for this setting.