PESA Cheetah 1024x256, Руководство пользователя

Страница: 151 / 235

C
HEETAH
S
ERIES
S
WITCHERS
– C
HAPTER
10
81-9059-0570-0 Rev. C
Proprietary Information of PESA S
WITCHING
S
YSTEMS
, I
NC
. 136
4) While using the ViewPort GUI and referring to the packing list/specification sheet, verify the
following:
Occasionally, there may be recorded errors during the initial startup
sequence. However, they typically can easily be reset when the clear
function is initiated.
a) Under the Cheetah directory, click on Frame Controller Status . Verify there are no
alarms and the MFC configuration (single or dual) is correct as per your specification.
b) Under the Cheetah directory, click on
Inputs
. Verify there are no errors and the input
module (card) configuration is correct as per your specification.
c) Under the Cheetah directory, click on Outputs . Verify there are no errors and the output
module (card) configuration is correct as per your specification.
d) Under the Cheetah directory, click on
Matrices
. Verify there are no errors and the matrix
module (card) configuration is correct as per your specification.
e) Under the Cheetah directory, click on Power Supplies . Verify there are no errors and
the power supply module configuration is correct as per your specification.
f) Under the Cheetah directory, click on Output Monitor . Verify the output monitor
module (card) configuration is correct as per your specification. For each module, verify
the
Power Status conditions are green and no other errors are present.
g) Under the Cheetah directory, click on Communications Summary . (This display
window is used as an overview of all system components.) Verify the status for each
component (4) is indicating green and there are no errors being displayed.
5) Frame Control Verification is complete. Exit the ViewPort program and disconnect the serial
cable from the PC and MFC. If your system includes the 3500 Series controller module(s),
proceed to System Control, Section 10.4.