Pertici WM1L/E, Инструкция по эксплуатации

Страница: 5 / 63

Instruction manual for use and maintenance
for WM1L/S WM1L/S-M WM1L/E Single
head machines
File: 1927.doc - 25/01/02 11:55
5
3. CHARACTERISTICS
3.1 Description of the machine
The welding machines type WM1/LS – WM1/LS-M and WM1/LE produced by PERTICI S.p.A.
are used mainly to weld at different angles, ranging from 180° to 40°.
A) Base plate
The base plate consists of a 3-mm thick sheet bed. (TAV. A1.1)
The elements of the base plate are bent in order to obtain the maximum rigidity and are
assembled by means of an intermittent weld. The control cabinet and all other mechanical
groups composing the machine, are mounted on the base plate by means of commercial bolts
and nuts.
The machine is also supplied complete with four vibration-damping feet, which are fixed to the
lower part of the base plate and permit to place the machine on the floor.
OPENABLE
FRONT
PROTECTION
CONTROL
CABINET
REAR FIXED
PROTECTION
BASE PLATE
PROFILE
SUPPORTING
ARM