Pertici WM1L/E, Инструкция по эксплуатации

Страница: 14 / 63

Instruction manual for use and maintenance
for WM1L/S WM1L/S-M WM1L/E Single
head machines
File: 1927.doc - 25/01/02 11:55
14
4. COMMISSIONING
4.1 Transport
The welding machines type UNIVER are shipped fully greased and wrapped in heat-shrink
nylon.
The sturdy design and form of the machines guarantee their safe and damage-free shipment
and storage.
A forklift truck can lift the machines by inserting the forks at the points marked on the machine
packaging (DWG. A1.9).
DWG. A1.9
If the machine is packed in a wooden crate, the fork insertion points are marked on the crate
itself.
Take great care when performing these operations in order to avoid injury to persons and
damage to the machine or property.
4.2 Positioning
The machine must be positioned on a stable floor. Do not install the machine near to areas
containing gas or flammable substances, as the sparks and glowing fragments produced and
scattered may cause explosions or fires.
Position the machine in a place that is easily accessible for the various works and various
hook-ups to:
1) The electric equipment.
2) The compressed air circuit.
Make sure the lighting is adequate for the whole machine
Remove the machine from its packaging and make sure it has incurred no damage during
shipment.
Remove the packaging: a forklift truck can now lift the machine. If transferred by forklift truck,
the forks must be inserted in the lower part of the base plate (DWG. A1.1). Avoid knocks, jolts
and sudden movements when handling the machine.