Pertici WM1L/E, Инструкция по эксплуатации

Страница: 16 / 63

Instruction manual for use and maintenance
for WM1L/S WM1L/S-M WM1L/E Single
head machines
File: 1927.doc - 25/01/02 11:55
16
DWG. A1.11
The support surface of this machine model is wide enough to ensure a good stability and to
avoid the machine tilting. The machine does not need, therefore, a permanent anchoring to the
floor.
After placing and levelling, remove the blocking elements (DWG. A1.12) of the moving parts of
the machine that have been placed for the transport and moving operations.
DWG. A1.12
Mounting of profile supporting arms (optional) .
The mounting and adjustment of this
device (optional) is carried out in our plant during the assembly phase of the machine, but it is
partially removed to ease the packaging and shipment operations. To reassemble this device
during the installation phase, proceed as follows:
- Enter the arms (1) into supports (2) fixed on the base plate of the machine
REMOVE
2
A