Pertici WM1L/E, Инструкция по эксплуатации

Страница: 4 / 63

Instruction manual for use and maintenance
for WM1L/S WM1L/S-M WM1L/E Single
head machines
File: 1927.doc - 25/01/02 11:55
4
2.9 The person in charge of the machine must be trained in the correct use of the machine
itself, the safety devices and accessory equipment.
2.10 The safety devices provided with the machine are already correctly installed and attached.
Both the safety devices and the entire machine must be submitted to routine and non-
routine maintenance procedures at the specified intervals.
2.11 Before starting each job and switching on the machine, make sure that there are no chips
or waste material from previous jobs on the work surface.
2.12 The operator must wear suitable clothing and use the correct safety equipment for the
type of work being performed:
Never wear bracelets or other articles, which may be caught up in the machine.
2.13 Before starting any job with the machine, ensure that there are no persons or other
potential sources of danger in the vicinity of the machine (an area of 150 cm around the
machine) (DWG. A1.4).
2.14 Make sure the electricity mains connection cable is undamaged and correctly positioned.
2.15 Do not place or use inflammable substances near the machine, as the sparks produced
may cause fires or explosions.
2.16 The operator must exercise the utmost care when enabling the pressors using the relative
selector switch, or when enabling the motor using the bi-manual switch.
2.17 Always consider the possible consequences before approaching any of the more
dangerous zones: heating plate area, pressor zone, welding seal limitation blades area.