
3
ROHO Hybrid SELECT Operation Manual
Important Safety Information, continued
Warnings:
-
DO NOT use the Hybrid Select with a power wheelchair at
greater than 10 degrees of anterior tilt. The product benefits will
be reduced or eliminated, resulting in an increased risk to skin
and other soft tissue.
-
DO NOT recline greater than 110 degrees in any wheelchair while
seated on a Hybrid Select. The product benefits will be reduced
or eliminated, resulting in an increased risk to skin and other soft
tissue.
-
When reclining in any wheelchair while seated on a Hybrid
Select: after reaching the desired recline angle, check to make
sure there is no pinching or tissue compression.
-
Areas of contact with the Hybrid Select may shift when the
wheelchair is adjusted to a recline angle, which may result in an
increased risk of tissue injury. BOTH after reaching the desired
recline angle AND after returning to an upright position: 1)
perform a Transition Check and Immersion Check on the Hybrid
Select, as instructed in this manual; 2) if using the Hybrid Select
without the IT Air Pad (Offload Option), check the position of the
ITs to confirm desired offloading.
-
A Hybrid Select that is not securely attached to a power
wheelchair may shift during wheelchair adjustments, resulting
in a safety risk to the user. Make sure that the Hybrid Select is
securely installed on the wheelchair. Confirm that the number and
position of hook and loop fasteners provide secure attachment to
the seat pan.
Cautions:
-
Do not use a pump, cover or repair kit other than those
compatible with the product.
-
DO NOT modify the cushion or any components. Doing so may
result in damage to the product and will void the warranty.
-
DO NOT allow the air cells to come into contact with oil-based
lotions or lanolin, which may degrade the material.
-
Prolonged exposure to ozone may degrade materials used in
the cushion, affect the performance of the cushion, and void the
product warranty.
-
Changes in altitude may require adjustment to the cushion.
-
Keep the cushion away from sharp objects.
-
If the cushion has been in temperatures lower than 32°F (0°C)
and exhibits unusual stiffness, allow the cushion to warm to warm
to room temperature.
-
Periodically, check the cover and components for wear and
damage and replace if necessary.
-
DO NOT use any of the following as a handle for carrying or
pulling the cushion: inflation valve, hoses, or the ISOFLO Memory
Control. Carry the cushion by the cushion base or by the carrying
handle on the cover. Using any other components to carry or pull
the cushion may damage the product.
Warnings - Motor Vehicle Transportation:
- Failure to pay attention to these warnings could result in severe
injury to the individual in the wheelchair or to others.
- Whenever possible, transfer out of the wheelchair and into a
manufacturer-installed vehicle seat without the cushion, and use the
vehicle’s crash-tested occupant restraint system.
- The cushion must be correctly and securely installed, used, and
maintained according to the instructions and warnings provided by
the cushion manufacturer.
- When the wheelchair is used as the vehicle seat, the cushion
should only be used with wheelchair frames that are equipped with
securement points specified in ANSI/RESNA WC-4:2017, section
19 (WC19) or ISO 7176-19, and that have been successfully crash
tested on a wheelchair in the forward-facing position.
- The wheelchair with the cushion must be used with an effective
wheelchair securement system and a properly positioned, crash-
tested pelvic and shoulder-belt restraint, or Wheelchair Tiedown and
Occupant Restraint System (WTORS), following the manufacturer’s
instructions.
- If the cushion has been involved in an accident during transport,
check the cushion for damage and replace if necessary. See the
“Troubleshooting” section in this manual.
- For more information about safely transporting wheelchair users,
refer to: http://wctransportation-safety.umtri.umich.edu/ridesafe-
brochure.
- A ROHO QUADTRO SELECT Cushion was included in a
wheelchair seating system that was dynamically tested by a
third-party testing facility for use in a motor vehicle. The system
tested meets all applicable criteria for wheelchair seating systems
proposed in Section 5.1 of ANSI/RESNA WC-4:2017 Section 20
“Wheelchair Seating Systems for Use in Motor Vehicles.
- Test results apply to seating systems intended for use by adults
and children with a total body mass greater than 23 kg (51 lb, or
approximately 6 years of age) who are transported facing forward in
their wheelchairs in all types of motor vehicles.
- To determine whether motor vehicle third-party testing has been
performed with a specific seating system combination, refer to all
provided equipment operation manuals or contact the equipment
manufacturer.
Содержание ROHO Hybrid Select
