Permobil C300, Руководство по обслуживанию

Страница: 41 / 68

41
ICS master module
ICS master module
(Only applies to chassis with R-net.)
The wheelchair seat may be equipped with an ICS
control system, and if so, the seat is controlled
from the system’s ICS master module. This is
fitted in the wheelchair chassis.
Removal
1. Raise the seat; electric seat lift to the highest
position; fixed seat tube to the service position.
See page 24. If the electric seat lift does
not work normally because the batteries
are discharged or the adjustment device is
defective, the seat can be raised/lowered
manually. See page 26.
2. Switch off the main power switch on the
control panel.
3. Remove the chassis cover. See page 8.
4. Pull the master module straight up out of its
holder (see illustration).
5. Pull the cover off.
6. Cut off the cable ties that hold the cables and
detach the electrical connections. Note their
positions for subsequent fitting.
assembly
Assemble in the reverse order.
De ICS Master Module met deksel eraf.
De ICS Master Module ligt los in de houder.