Permaquip Kubota RRV, Руководство пользователя

Страница: 15 / 56

MAN-M-O-190_13 09/10/2014 Page 15 of 56
5.3. Rear Seat/Load
When exiting from the rear seats, face towards the front of the vehicle to
step down as this is the safest method (in the same manner to climbing
down a ladder). Step on white areas only as these have a gritted non-slip
surface.
An Engine Stop and horn button have been fitted to allow passengers on the rear
seats (rail mode only), as shown below.
The Engine Stop will stop the engine, thereby bringing the vehicle to a stop in the
required distance (rail mode only).
The rear seats can be raised should loads be required to be carried. It is not
recommended that loads and personnel are transported at the same time.
Loads can be restrained by using the rear load bay fabrication tubes. Do not over
tighten any restraints, causing damage to the load or fabrication.
Each raised and lowered position should be locked in position with the Safety Pin, as
shown below.
Seats up