Permaquip Kubota RRV, Руководство пользователя

Страница: 24 / 56

MAN-M-O-190_13 09/10/2014 Page 24 of 56
6.4. Lowering the Rail Gear
Once on track, the front rail gear can be lowered. The marker lights or work lights
can be used to illuminate the working area if required.

Remove the two lock pins from the stowed position.

Remove the lift handle form the storage position and locate the handle into the
socket tube on the rail gear cross beam.

Lower the rail gear onto the track, passing the over centre position. Note that
the rail gear is assisted by a gas strut to reduce the manual handling.

Replace the lock pins into the on-rail position.
In a similar manner to the front rail gear, lower the rear rail gear into position. Ensure
all lock pins are in position, and that the lift handle is placed back into the storage
position.