Permaquip Kubota RRV, Руководство пользователя

Страница: 26 / 56

MAN-M-O-190_13 09/10/2014 Page 26 of 56

Release the hand brake and move forward and fully apply the footbrake.
Check that the Service Brakes are applied and that the consist stops smartly.

Release the hand brake and move forward and partly apply the footbrake.
Check that the consist stops gently.

The Service Brake trolleys are now ready to be loaded. Check that all loads
are safely secured before moving off.
Note: Maximum speed is ~
12 mph when the gear selector is in the ‘reverse’ position.
Maximum speed is ~10 mph when the gear selector is i
n the ‘low’ position.
Maximum speed is ~
18 mph when the gear selector is in the ‘Medium’ position.
Maximum speed is ~
25 mph when the gear selector is in the ‘High’ position.
Only use the ‘high’ position when off track and on the road and when suitable
conditions allow.
6.6. Off-tracking Procedure
Ensure that no passengers are in the vehicle.
Note the maximum cant and gradient, as defined in the Technical
Specification.
Assess the area for the most suitable method of off-tracking and position the vehicle
accordingly. The following details the correct procedures for off-tracking:
Crossings and prepared Access Points

Drive the vehicle onto the level crossing and apply the handbrake.

Refer to the sections ‘Raising the Front Rail Gear’ and ‘Raising the Rear Rail
Gear’.

Disengage the Steering Lock, as shown below.

The vehicle can then be driven off the track.