perma-tec GmbH & Co. KG
- 2 -
The Expert in Lubrication Solutions
1.2 Delivery
♦ perma STAR CONTROL TIME can be ordered and delivered according to custo-
mer specifications in regards to type of grease and oil, size / content of LC unit.
♦ Upon delivery, make sure to check if the delivered goods correspond to your
order. perma-tec GmbH & Co. KG will not accept liability for subsequent claims
of any shortcomings.
♦ Please immediately forward any claim
▪ of noticeable transport damage: directly to the forwarder
▪ of noticeable faults, shortcomings or defects: directly to your perma distributor.
1.3
Lubricator perma STAR CONTROL TIME
1.3.1 Markings
♦ The lubricator perma STAR CONTROL TIME is clearly marked with a label on
the drive system and a label on the LC unit.
♦
CE Mark
on the drive unit
♦ Manufacturer:
perma-tec GmbH & Co. KG
Hammelburger Straße 21
97717 Euerdorf, Germany
Tel: +49 (0) 9704 609-0
E-mail: [email protected]
Fax: +49 (0) 9704 609-50
Homepage: www.perma-tec.com
1.3.2
Intended Usage
♦ The lubricator perma STAR CONTROL TIME
▪
supplies all lubrication points with oil and grease to a large extent continu-
ously, precisely and temperature independent up to a pressure build-up of
max
5 bar / 75 psi
; can be turned off and on via the machine (machine
controlled).
▪
can be used for all lubrication points of sliding- and roller bearings, drive-
and transport chains, sliding guideways, open gears and seals.
▪
is intended for use on machinery and equipment where lubrication is only
to take place when the machine is running, and where a status report to the
machine is desired.
▪
is only to be used for the ordered purpose and purposes confirmed by
perma-tec.
