© 2020 - perma-tec
GmbH & Co. KG
|
www.perma-tec.com
|
31
30
|
perma ECOSY
8.4
System Configuration
• Discharges can be triggered by external control signals. Such
signals do not come from the ECOSY 5 software, but from ex-
ternal sensors, a primary control, or a manual entry.
• Internal signals will convert the external signals into lubricant
discharges. External impulse signals can come from:
– Mechanical or electrical switches
– A primary control
– A manual entry on the perma ECOSY
8.4.1 The Operating Modes - Selecting the Operating Mode
(TIME / CONTROL / SENSOR)
The perma ECOSY 5 has an internal time measurement function.
This time measurement function is used to control and internally
trigger oil discharges.
The perma ECOSY 5 can be operated in the following operating
modes:
• TIME - chapter 8.4.1.1
• CONTROL - chapter 8.4.1.2
• SENSOR - chapter 8.4.1.3
NOTE
