© 2020 - perma-tec
GmbH & Co. KG
|
www.perma-tec.com
|
21
20
|
perma ECOSY
CAUTION
7
Refilling the Reservoir
7.1
General Points to Consider
The display indicates a necessary refill. The necessary refill is also
transmitted to any linked superior control system.
• No smoking, no open flames within a radius of 15 m (45 ft)!
• Ensure that no water or foreign liquids enter perma ECOSY 5
or the lubrication point. Refills may only be carried out in dry
areas or with effective protective measures!
• If a different oil type is to be used, the user has to make sure,
that the new oil is compatible with the oil formerly used in the
lubrication system and that it is suitable for the application!
7.2
Refilling Procedure
• Open the screw cap. Filter must remain in the filler neck. Check
filter. If necessary, remove, clean, and re-insert filter.
• If necessary, use an approved, clean filling device (funnel) or
pump (with filter) and a clean tube.
Make sure that the oil type in the refill container is correct!
• Refill oil of corresponding quality and type (max. fill level =
bottom of filler neck).
• Screw cap on hand tight.
• If applicable, confirm minimum fill level error message
(press button “OK” at the display).
• If necessary, check or change settings.
Discharge will continue.
CAUTION
