Perle RPS1620 Скачать руководство пользователя страница 51

Страница: 51 / 72

6-3

Operation

6.2. Operation via the Text Interface

When using the Text Interface, all switching functions are performed by

invoking simple, ASCII commands. ASCII commands are also used to display

status screens and to log out of command mode. The Text Interface also

includes a Help Menu, which summarizes all available RPS commands. To

display the Text Interface Help Menu (Figure 6.3), type

and press

[Enter]

6.2.1. The Plug Status Screen - Text Interface

When you log in to the RPS command mode using the Text Interface, the ﬁrst

screen displayed after login is the Plug Status Screen. The Plug Status Screen

(Figure 6.2) lists the current status of the RPS’s Switched AC Outlets and

displays the ﬁrmware version and currently deﬁned Site I.D. Message.
Normally, the Plug Status Screen will also be redisplayed each time a

command is successfully executed. Note however, that if desired, the

Automated Mode (See Section 6.4) can be enabled to suppress the display of

the Plug Status Screen after each command.

Remote Power Switch v1.43s Site ID: (undeﬁned)

-----+------------------+-------------+--------+-----------------+---------+

1 | (undeﬁned) | (undeﬁned) | ON | 0.5 Secs | ON |

2 | (undeﬁned) | (undeﬁned) | ON | 0.5 Secs | ON |

3 | (undeﬁned) | (undeﬁned) | ON | 0.5 Secs | ON |

4 | (undeﬁned) | (undeﬁned) | ON | 0.5 Secs | ON |

5 | (undeﬁned) | (undeﬁned) | ON | 0.5 Secs | ON |

6 | (undeﬁned) | (undeﬁned) | ON | 0.5 Secs | ON |

7 | (undeﬁned) | (undeﬁned) | ON | 0.5 Secs | ON |

8 | (undeﬁned) | (undeﬁned) | ON | 0.5 Secs | ON |

-----+------------------+-------------+--------+-----------------+---------+

“/H” for help.

RPS>

Figure 6.2: Plug Status Screen - Text Interface (Model RPS830 Shown)

Содержание RPS1620









































































Результаты поиска

Содержание RPS1620

Отзывы:

Похожие инструкции для RPS1620

Бренды по названию

Популярные бренды

Perle RPS1620, Руководство пользователя

Результаты поиска

Содержание RPS1620

Отзывы:

Похожие инструкции для RPS1620

Бренды по названию

Популярные бренды