Perkins 1300 EDi Series, Руководство по ремонту, Страница: 106 / 264

6
94 Workshop Manual, TPD 1353E, Issue 3
Peregrine EDi and 1300 Series EDi
To fit Operation 6-6
1 Clean and inspect all components for wear or damage. Inspect the timing case for cracks, especially around
the channels for the engine fluids.
2 Fit a new joint (A5) to the backplate.
3 Engage the backplate dowels (A3) and push the backplate onto the engine.
4 Lightly lubricate the threads and shoulders of the setscrews for the backplate with clean engine lubricating
oil.
5 Fit and tighten the setscrews to 26 Nm (19 lbf ft) 2,6 kgf m.
6 Fit the camshaft, see Operation 6-8.
7 Fit the tappets into their original bores.
8 Fit the cylinder head, see Operation 3-9.
9 Fit the oil pressure relief valve together with its ‘O’ ring (A6).
10 Fit the idler gears, see Operation 6-4.
11 Fit a new coolant filter.
12 Fit the power steering pump, see Operation 15-2, the compressor, see Operation 15-1, and their mounting
brackets, if removed earlier.
13 Fit the high-pressure pump, see Operation 10-22.
14 Fit the timing case cover, see Operation 6-2.
15 Fill the cooling system to the correct level.
16 Fill the lubricating system to the correct level with an approved oil, see Chapter 5 in the User’s Handbook.
1
A
W231
2
4 5
3
6
7
8
9
This document has been printed from SPI². Not for Resale