background image

General information

This manual provides instructions for the installation and use of the TriNEST Microplate incubator and shaker

instrument.

Changes from previous manual version

Changes made to this manual are marked with underlined text.

Trademarks

Copyright 

©

 2008-2022, PerkinElmer, Inc. All rights reserved.

PerkinElmer

®

 and Wallac

®

 are registered trademarks of PerkinElmer, Inc.

TriNEST

 is a trademark of PerkinElmer, Inc.

All other trademarks are the property of their respective owners.

Intended purpose

The TriNEST

 microplate incubator and shaker is an IVD instrument intended to be used for incubation and shaking of

microplates in accordance with the specific requirements of the different assays. The instrument is semi-automated and

intended to be used by trained laboratory personnel.
The function, specific disorder, condition or risk factor to be identified, the product's quantitative and qualitative

properties, the specimen type, and the testing population are based on and described within the intended purpose of

the applicable IVD assay.

Contact information

Manufacturer

Wallac Oy,
Mustionkatu 6,
FI-20750 Turku,
Finland.
Tel: 358-2-2678111.
Fax: 358-2-2678 357.
Email: [email protected]
Website: www.perkinelmer.com

If you require service or assistance, please contact your local PerkinElmer representative.

Table of symbols

Symbol

Description

CE compliance mark

TriNEST Microplate incubator and shaker

General information

1

Содержание TriNEST



































Отзывы: