manualshive.com logo in svg

Perkin-Elmer TITAN MPS, Руководство пользователя

Поделиться
Скачать
Perkin-Elmer TITAN MPS Скачать руководство пользователя страница 24

14

Safety Practices

EMC Compliance

Europe

This device has been designed and tested in accordance with the following IEC 
publications:

IEC 61010-1: Safety requirements for electrical equipment for measurement, 
control, and laboratory use.

IEC 60335-2-90: Particular requirements for commercial microwave ovens.

All information concerning EMC standards is in the Declaration of Conformity, 
and these standards may change as the European Union adds new requirements.

United States (FCC)

This instrument has been tested and found to comply with the limits for a Class A 
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference when the instrument is 
operated in a commercial environment. This instrument generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the 
instruction manual, may cause harmful interference to radio communications. 
Operation of this instrument in a residential area is likely to cause harmful 
interference in which user will be required to correct the interference at his own 
expense.

This instrument has been designed and tested to CISPR 11 Class A. In a 
domestic environment it may cause radio interference, in which case, 
measures to mitigate the interference have to be taken.

Note

Evaluate the electromagnetic environment prior to operation of the device.

!

Содержание TITAN MPS


































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды