manualshive.com logo in svg

Perkin-Elmer TITAN MPS, Руководство пользователя

Поделиться
Скачать
Perkin-Elmer TITAN MPS Скачать руководство пользователя страница 11

Safety Practices

1

Overview

This chapter describes the general safety practices and precautions that must be 
observed when operating the Titan MPS

TM

. 

This advice is intended to supplement, not supersede, the normal safety codes in 
the user's country. It is also a supplement to the PerkinElmer standard Safety and 
Health Policy. The information provided does not cover every safety procedure 
that should be practiced. Ultimately, maintenance of a safe laboratory environment 
is the responsibility of the analyst and the analyst's organization. 

Please consult all documentation supplied before you start working with the 
instrument. Carefully read the safety information in this chapter and in the other 
manuals supplied. When setting up the instrument or performing analyses or 
maintenance procedures, strictly follow the instructions provided. 

Note

This instrument requires no specified inspection or preventive 
maintenance to ensure the continuous functioning of its safety features.

Warning

Prohibited for persons with heart pacemakers!

The microwave device must not be operated by persons with heart 
pacemakers.

Содержание TITAN MPS


































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды