manualshive.com logo in svg

Perkin-Elmer TITAN MPS, Руководство пользователя

Поделиться
Скачать
Perkin-Elmer TITAN MPS Скачать руководство пользователя страница 127

117

Pressure Digestion Vessel

Pressure Digestion Vessel

You can obtain technical support from your local PerkinElmer office or directly 
from PerkinElmer.

Visit our website:

http://perkinelmer.com

For calls:

If you are located within the U.S., call toll free 1-800-762-4002, 8 a.m. to 

8 p.m. EST. 

Problem

Possible Cause(s)

Corrective Action

Vessels leak.

TFM seal is not sealing effec-
tively on the digestion vessel.
Expand the lip of the TFM 
seal using the TFM seal tools
If the TFM seal is damaged, 
replace the seal.

Expand the lip of the TFM 
seal using the TFM seal tools
If the TFM seal is damaged, 
replace the seal see Chapter 6 
Maintenance, Replacing TFM 
Seals and Metal Rupture 
Discs. 

Corroded rupture disks.

Corroded rupture disks
Turntable function faulty.
Sample quantity too big.
Spontaneous reaction.
DTC Temperature measure-
ment inaccurate.

Replace burst disks more fre-
quently.

Check turntable function.
Reduce sample weight.
Reduce maximum tempera-
ture.

Contact your PerkinElmer 
Service Representative.

DPC not preventing rupture 
discs from venting.

Measured pressure is inaccu-
rate.

Inspect and clean the glass 
prism and glass ring in the 
pressure-gauge cap. 
Perform a Pressure Calibra-
tion.

Содержание TITAN MPS


































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды