Peri SB Brace Frame, Инструкция по сборке и эксплуатации

Страница: 37 / 84

33
33
34
34.1
34.1
40
32.3 32.1 32.2 32.4
32.2 /
32.4
32.1 /
32.3
C1 Connecting to the Systems
SB-1
SB Brace Frame for single-sided walls
Instructions for Assembly and Use – Standard Configuration
Connecting the Connector SB-1, 2 -
MX/TR/D with the element
Preparation
1. Position the element or element unit
on trestles.
2. Insert sleeves (32.2 or 32.4) into the
anchor holes of the element; only
with MAXIMO.
3. Position the Connector SB (34) with
the connections on the anchor holes.
4. Insert Bolts SB-MAXIMO (32.1) or
Bolts SB-TRIO/DOMINO (32.3) from
below.
5. Fix Connector SB to both anchor
holes with wedges (34.1).
6. Fix additional Connectors SB to the
anchor holes.
(Fig. C1.02)
Mounting the Brace Frame
1. Position the element or element unit
on timbers.
2. Swivel in Brace Frame with the crane
and position on the Connector SB
(34).
3. Mount two Hook Strapss (33) to the
lugs (Pos. 1 + Pos. 3) of the Connec-
tor SB and secure with nuts. Put
board underneath as slide protection.
(Fig. C1.03)
If a connection at Position 3 is not
possible, then use Position 2.
4. Release crane lifting gear.
5. Mount second Brace Frame.
6. Brace the Brace Frames horizontally
and vertically with scaffold tubes (40).
(Fig. C1.03)
7. Check all fixing points to ensure they
are secure.
8. Mount concreting platforms.
9. Adjust height of the transportable unit
with the spindles.
Erection
Permissible capacity of load-bearing
point: 1.0 t with a crane sling angle
of ≤ 15°.
Erect, move, align and anchor transport-
able unit with the crane on the
load-bearing points.
Fig. C1.02
Fig. C1.03
Pos. 1
Pos. 2
Pos. 3
Item no.: 027690 113255 114107 114417