Pergola kits USA WOOD PAVILION, Инструкция по сборке

Страница: 7 / 32

Locate the 12 GRK 4” screws.
Screw three GRK 4” into left
and right side of the header
seam on the center post
(using the predrilled holes).
Repeat on the opposite side
of the pavilion anchoring your
last two beams.
6X
7
PUSH
Fasten rail to bottom of the
header with two 2 1/2" screws
approximately every 16". Do
that with all six rails on the
underside of each header.
Push rail up against the
bottom of the header. Put in
center of post. Fasten to post
with four 2 1/2" screws on
both sides. Make sure the
screws on the braces are
turned in toward the inside
of the building.
Locate 24 8" GRK screws in the
hardware box. Those go in the
predrilled holes at the corners
of the beams. (6 per corner)
18
16
17
19