Pergola kits USA WOOD PAVILION, Инструкция по сборке

Страница: 9 / 32

9
PUSH
Install the four 2X12 top plates.
The top plates should mount
close to flush with the inside
post. Make sure that the over-
hang is the same on both sides.
Use two 3 1/2" screws to fasten
the plates to the posts. Do not
cut these without calling.
When all of the nuts have
been tightened down and
the posts are securely mount-
ed to the concrete slab, slide
the post trim down into place.
Fasten tie straps, ST2215, with
1 1/2” screws at every seam
on the top of the plate.
Squarely align the two 2x12
plates forming a right angle. It
is important that the top plate
boards equally overhang the
structure to accurately center
the roof. Fasten the two 2x12
plates together at the corner
with one 3 1/2" screw. Once
you have all four corners
together, put two 2 1/2" screws
down into the header approxi-
mately every 16" all around.
26
27
24
25