Pergola kits USA WOOD PAVILION, Инструкция по сборке

Страница: 10 / 32

10
Set finished sections up onto
plate.
Fasten the marked "Side
Rafters" to a marked "Ridge
Pole" at each "X", keeping
one edge of the rafters flush
with the vertical line and the
top edge flush with the top of
the ridge pole.
Screw the two sections togeth-
er at the top with two 2 1/2”
screws between every rafter.
Keep ends even.
Fasten two 2x4 temporary
props at either end of ridge
pole to hold in place.
30
29
28
31
RIDGE POLE
NOTE: If you ordered a square
pavilion turn to page 25 and
follow instructions.