Pergola kits USA WOOD PAVILION, Инструкция по сборке

Страница: 24 / 32

Heavy Duty Anchors for High Wind
24
3
1
After placing post bases on
from step 8, slide HD high
wind bracket onto the bottom
of the post. Screw two
3/8”x3” hex lags into the
predrilled holes on opposite
sides of the bracket. Repeat
on all posts. Continue on with
regular instructions starting at
step 9.
Screw into each post the
remaining six 3/8”x3” hex lags
using the predrilled holes.
Repeat with all posts.
Remove dust from hole. Next,
screw the nut and washer on
about 1/8” below the top of
the bolt. Insert the wedge
anchor bolt into the hole. Tap
the bolt into the ground using
a piece of wood as a buffer to
protect the threads and nut.
Repeat on remaining 3 sides
of the post then repeat on
all other posts.
2