21
After placing post bases on
from step 11, slide HD high
wind bracket onto the bottom
of the post. Screw two
3/8”x3” hex lags into the
pre-drilled holes on opposite
sides of the bracket. Repeat
on all posts. Continue on with
regular instructions starting at
step 12.
1
3
Remove dust from hole. Next,
screw the nut and washer on
about 1/8” below the top of
the bolt. Insert the wedge
anchor bolt into the hole. Tap
the bolt into the ground using
a piece of wood as a buffer to
protect the threads and nut.
Repeat on remaining 3 sides
of the post then repeat on all
other posts.
Screw into each post the
remaining six 3/8” x 3” hex
lags using the pre-drilled
holes. Repeat with all posts.
2
Heavy Duty Anchors for High Wind
