Fasten the corner trim with
four 2 1/2" screws.
13
Once you have all the bottom
roof decking off, screw each
rafter down into plate with
one 2 1/2" screw down the
center and two 3 1/2" screws
angled on the sides.
Now you are ready to fasten
the rafter to the plate. First
take your bottom 1x6
roof
decking
board off. There
should be about two or three
screws you need to back out.
Make sure your ridge beam
does not sag in the center.
You might need to put a prop
in.
Once you have all the rafters
fastened, put your roof decking
board on again.
42
41
40
43