8
9
When complete, repeat steps
6-8 on the other gable end.
Once gable end trim is cut to
angle, attach the trim piece
with one 1” screw into the
fascia board every 24” of the
open gable end. Next, fasten
the top of the same trim piece
with 1” screws at every roof
lath.
Locate ridge cap. Remove
backing from foam and
attach to the underside of
the ridge cap. Place ridge
cap, flush with previously
installed trim, fastening every
24” with 1 1/2” screws on both
sides.
7
17
