16
Install the tin, starting at right
side and moving left. Ensure
the first piece is installed
squarely. Keep the bottom of
the tin flush with the drip
edge. Fasten with 1” screws.
The first piece will have 3
screws at every lath.
Once you have all the tin
installed, hold the gable end
trim in place to mark the upper
end of the trim that will need
to be cut to meet flush with
the other side.
Install the ribbing roughly
1 1/2-2" from the bottom of
the drip edge. Do not stretch
the ribbing because the
grooves of the roof must
line up with the ribs.
The next piece must properly
overlap on the far edge. Last
piece may need to be cut to
size to be flush with the edge
of the fascia.
6
3
5
CUT TRIM AT PEAK
4
