Installation and Operation Manual
for P
erenio®
UV Lamp
©Perenio IoT spol s r.o. A
ll Rights Reserved
Doc Version: 1.0.2
Page
17
из
39
3.
Remove the UV tube carefully from the lamp bracket as follows:
•
Hold the base of the UV tube with the hand and rotate it in the lamp
bracket until the connector is visible in the hole for base connectors;
•
Pull the UV tube base slightly in order to remove it from the lamp
bracket.
4.
Insert the lamp bracket into the mounting brackets.
5.
Carefully remove dirt, dust and fingerprints from the UV tube with a cotton
cloth wet with alcohol.
