Installation and Operation Manual
for
Perenio®
UV Lamp
Doc Version: 1.0.2
©Perenio IoT spol s r.o. A
ll Rights Reserved
Page
36
из
39
5 Storage, Transportation and Disposal of Devices
The
Perenio
®
UV Lamp may be shipped by any kind of covered vehicles (by rail, or
road or in sealed heated airplane compartments, etc.) in accordance with the
requirements of current regulatory documents applicable to fragile goods sensitive
to moisture.
Similar conditions shall apply to the device storage at the Seller’s wa
rehouse.
For disposal of battery, the User shall observe rules of the Directive on Waste
Electrical and Electronic Equipment (WEEE) according to which all electric and
electronic products, as well as batteries must be disposed of separately at the end of
their service life. Such devices and accessories must not be disposed of together with
unsorted municipal waste due to their potential to cause harm to the environment.
To dispose of a device that contains mercury, the User must take it to their local
recycling facility due to the following reasons:
•
If the UV tube is damaged, mercury vapors will be released into the air, water
and/or soil and contaminate it, as well as may bring harm to human health, if
the vapors are inhaled;
•
The UV lamp components may also need to be recycled.
If the User cannot dispose of the device in a specialized facility for recycling of lamps,
then they can also take it to a hardware and household store, the local department
of the Ministry of Emergencies or a similar institution.
For the device disposal purposes, it shall be returned to the point of sale or to the
local processing center.
For detailed information on recycling of the present device, please contact your waste
management company.
NOTE.
The User must comply with the temperature and humidity conditions of
storage and transportation specified in the Table of technical specifications of the
present Installation and Operation Manual.
