Installation and Operation Manual
for
Perenio®
UV Lamp
Doc Version: 1.0.2
©Perenio IoT spol s r.o. A
ll Rights Reserved
Page
22
из
39
B
.
CONNECTION PROCESS (POWER LINK WI-FI)
a.
After
login to the User Account, click on the “+” icon
in the right upper corner of the
“
Devices
”
tab and
select the smart plug in the list;
b.
Select the device type
–
Power Link (Wi-Fi)
;
c.
Enter the password from the Wi-Fi Network or select
another network
;
NOTE.
The device may be connected to
Wi-Fi Network of
2.4GHz
only.
d.
Click on the
CONNECT
button
;
NOTE.
Before connecting, make sure that the smart plug
is powered on and that the smartphone is located at a
distance of not more than 2 meters from it.
e.
Press and hold the power button until the LED indicator
starts blinking;
f.
Clink on
START SEARCHING
button
;
g.
Wait for the connection process to be completed
.
NOTE.
If any failures, follow instructions specified on corresponding screens of the
smartphone.
After successful connection of the device, the User may
specify the following:
a.
Image;
b.
Device name;
c.
Device Location;
d.
Room
.
After completion, click on the
DONE
button.
NOTE
that all the above data may be entered or edited on
a later basis in the device control panel.
The smart plug will be displayed in the
“
Devices
”
tab.
