Installation and Operation Manual
for P
erenio®
UV Lamp
©Perenio IoT spol s r.o. A
ll Rights Reserved
Doc Version: 1.0.2
Page
33
из
39
4 Warranty Obligations
The warranty period for the
Perenio®
Smart Health
UV Lamp shall be
Twenty-
Four (24) months
from the date of sale to the End User.
The warranty period for the cable is
Six (6) months
from the date of sale to the End
User.
ATTENTION!
The UV tube is not covered by the warranty as they are subject to
natural wear and tear and must be replaced from time to time at a Service Center.
The Manufacturer claims a device service life of
6,000 hours
for the UV tube.
The Warranty Card shall be deemed valid provided that it is correctly and completely
filled in by the Seller. Upon the purchase, the Customer shall check that both the
Serial Number and the Model name of the device corresponds to those indicated in
the Warranty Card.
Incomplete or illegible Warranty Card shall be deemed not valid. In this case, it is
recommended to contact the Seller and ask for a duly filled Warranty Card. It shall
be also allowed to provide the original of the sales/cashier’s receipt or such other
documentary evidence of the fact and the date of sale of the device. The date of sale
shall be the date indicated on the sales/cashier’s receipt or other relevant document.
If the date of sale is not possible to be determined, the start of the warranty period
shall be the date of manufacture of the device.
The Manufacturer shall guarantee that all materials, components and assemblies of
Perenio®
devices are free from defects under normal operation within the warranty
period. The limited warranty shall be applied to the first End Customer of
Perenio®
devices only and cannot be transferred to a subsequent customer.
For warranty replacement, the device must be returned to the Seller along with its
receipt. Warranty obligations for
Perenio®
devices shall be provided in the country
of their purchase only.
WARRANTY SERVICE PROCEDURE
In the case of any alleged defect or deficiency of the device detected, the Customer
shall contact the Authorized Service Center before the warranty period expiration and
provide the following:
1.
The device with an alleged defect or deficiency.
