Installation and Operation Manual
for P
erenio®
UV Lamp
©Perenio IoT spol s r.o. A
ll Rights Reserved
Doc Version: 1.0.2
Page
19
из
39
2.2.1 Rules for Remote Operation of the UV Lamp
When managing the device via the
Perenio Smart/Perenio Lite
mobile application
or via voice assistants, the following rules should be observed:
1.
Before operation, close doors and windows in the room, as well as shut down
the supply-and-exhaust ventilation and block the air ducts to ensure the proper
level of disinfection.
2.
Do not turn on the UV Lamp if any people and/or animals in the room.
3.
Timely warn people about the time of UV treatment, or attach a disinfection
schedule and a corresponding warning at the room entrance, as well as do not
allow pets to enter the above premises.
4.
Note that after the UV Lamp is turned off remotely, the room must be still
thoroughly ventilated for at least 30 minutes before being used by people
and/or animals.
5.
Assign an appropriate name for the smart plug turning the UV lamp on and off
in such a way as to easily distinguish it in the list of other smart plugs activated
in the mobile application (for example,
“
UV lamp in the kitchen
”
,
“Smart plug
for UV lamp
”
).
2.2.2 Rules for Manual Operation of the UV Lamp
1.
Turn the device on and off with dry hands only.
2.
Before operation, close doors and windows in the room, as well as shut down
the supply-and-exhaust ventilation and block the air ducts to ensure the proper
level of disinfection.
3.
Wear suitable eye and skin protection against UV radiation to turn the lamp on
and off.
4.
Do not inhale ozone vapors while next to the operating UV Lamp.
5.
After turning off the UV lamp, ventilate the room for at least 30 minutes and
keep people and/or animals out of it until the treated area is completely
ventilated.
2.2.3 Recommended Exposure Time
The UV treatment period depends on the room type and the area of installation of
the device. See the approximate UV expose time for the
PELUV01
UV Lamp in the
table below.
