Pereko AGRO Multi 12, Руководство по эксплуатации и обслуживанию

Страница: 73 / 116

37
To update the software:
disconnect power supply of the regulator.
insert microSDHC memory card (other
types of memory cards are not
supported) to a socket in the movable
casing of the panel shown above. On the
memory card there should be written new
software in the
*.pfc format as a 2 files:
a file with the panel software and a file
with the module A software.
Software files should be placed directly
on the memory card, do not place them
in any subdirectory,
then connect power supply of the
regulator and go to:
Service settings
→
Software update and
perform the update firstly in the A module,
then in the panel, and in the end in other
devices.