Pereko AGRO Multi 12, Руководство по эксплуатации и обслуживанию

Страница: 28 / 116

4 • PAGE
User’s manual for screw-conveyor feeder Multi PSQ
2. ASSEMBLY INSTRUCTIONS
2.1. Feeder assembly
The Multi PSQ feeder is installed on four screws M12x20 to the connecting plate in the boiler. Precisely
seal the surface between the frame of the boiler and feeder using heat-resisting silicone to 1200°C.
Precisely check screw connections and tighten them fi rmly before fi rst start-up. Unscrew leg of the
feeder to ensure that it precisely adheres to the substrate after installation.
Note! Adjust leg of the feeder to ensure that it adheres to the substrate before
fi lling the fuel container.
2.2. Sealing
Bottom cleaning hole located under sieve of the burner should be sealed with a heat-resistant sili-
cone up to 1200°C.
2.3. Assembly of post-combustion de fl ector
Chamotte plate (230 × 115 × 33 mm) used as a de fl ector for post-combustion of fl ammable gases is
enclosed in the boiler. The plate should be placed in accordance with the fi gure 1.
De fl ektor ceramiczny
P ł askownik
monta ż owy
de fl ektora
Ceramic de fl ector
Mounting fl at bar
for de fl ector
Figure 1. Assembly of ceramic de fl ector