Assembly and Operation Manual
Figure 12. Glass panel mounting
1 – M10 bolt; 2 – plastic bushing; 3 – M10 nut; 4 – spring washer; 5 – expanded washer;
6 – glass panel; 7 – rotary support
9
OPERATION
Observe safety requirements given in Section 7.2.
Warning!
Do not move any objects through the passageway whose dimensions exceed the width
of the passageway.
Do not hit elements of the swing gate so as to prevent their mechanical damage.
Do not dismantle or adjust mechanisms ensuring operation of the swing gate.
Do not use substances for cleaning of the swing gate that may cause mechanical
damage or corrosion of the surfaces.
9.1 Power-up
Attention!
Make sure that there are no obstacles in the rotation zone and passageway of the gate
before starting the power-up.
Perform the following actions in order:
1. Connect the power cable to the electric socket with voltage and frequency set in the certificate
of the power supply unit.
2. Turn the power supply unit on.
3. The swing gate will detect
“Closed”
position in automatic mode (see Figure 5).
4. In the pulse control mode the swing gate will switch to the
“Always locked”
mode, in the
potential mode the swing gate will switch to the
“Locked in both directions”
mode. The red
indicator located above the
STOP
button on the RC panel will turn on.
The swing gate is ready for operation.
16
