background image

V1553B UserÕs Manual

Chapter 1 Introducing the V1553B

1

1. I

NTRODUCING

 

THE

  V1553B

1.1 Product Overview

The V1553B circuit card assembly is a 3U VME compatible A24/D16 interrupt capable board with one or two separate dual
redundant MIL-STD-1553-B interfaces. Each 1553 interface has the capability to time-tag incoming messages. A 16-bit
programmable register can be either clocked internally or via an external oscillator source connected through the front panel. 
The internal clock source is accurate to within 2

µ

s. Each 1553 interface has an 8 kByte dual-ported RAM buffer that is

accessible by a host processor on the VME interface.

The V1553B offers the user all the functions he requires, to be able to use his VMEbus in a Bus Controller (BC), Remote
Terminal Unit (RTU) and bus Monitor (MT) mode in conjunction with this DoD standardized bus.

The V1553B module with its interfaces, transformers and transceivers provides serial communication to either this Military
standard bus, or to field busses on a Manufacturing Automation Protocol (MAP) network. 

Further to its roles in military or naval systems, applications for this bus are found in harsh environments such as oil drilling
industry where it could be used to monitor drill bit conditions down the well, the nuclear reactor industry for critical process
control etc.

1.2 Ordering Information

The V1553B is available as a single slot PepCard module operating within the E2 (-40¼C to +85¼C) temperature range.

Table 1.2 V1553B Ordering Information

Product

Description

Order No.

V1553B

VMEbus to 1553A/B bus single board interface, with two separate
dual redundancy serial interfaces and full status control LEDs

11263

V1553B

VMEbus to 1553A/B bus single board interface, with two dual
redundancy serial ports and full status control LEDs.

11264

V1553-DS V1553B MIL-STD-1553 components: Data-sheet for BU61580,

BU29854 and userÕs guide for BU61580

12980

V1553B-

LIB

V1553B MIL-STD-1553 interface library for easy programming of
the V1553B board in Bus Controller, Remote Terminal and Bus
Monitor modes.

12979

V1553B  is also available with a 6U Front panel, to be fitted into double-height systems.

June 22, 1998 

© 1996 PEP Modular Computers Page 1-1

Содержание V1553B

























Отзывы: