Pentair FLECK 3150 NXT Скачать руководство пользователя

Страница: 114 / 182

Installer manual Fleck 3150 NXT/NXT2 - Programming

114 / 182

Ref. MKT-IM-010 / C - 18.10.2019

6.2.5.29

Push settings

Select the desired Master Programming settings on one unit then push the same
settings to all other connected units.

Info

Available only for multi-valves systems.

Info

The ability to transmit settings from one unit to all other connected units. After push
settings are complete, you may still make unique changes to individual units.

Options:

• off;

• on.

a) Select the push settings with

and

;

b) Default setting: enabled;

c) Press to validate the selection and advance to the

next parameter.

6.2.5.30

Save as non-factory

Info

Parameters set on master programming menu can be saved as a non-factory program.
This saved program will be restorable from the reset menu.

Options:

• off;

• on.

a) Select save as non-factory option with

and

;

b) Default setting: disabled;

c) Press to validate the selection and advance to the

next parameter.

6.2.5.31

Lock settings

Select the desired lock settings option (off, time based, delayed, or enter code).

Содержание FLECK 3150 NXT























































































































































































Результаты поиска

Содержание FLECK 3150 NXT

Отзывы:

Похожие инструкции для FLECK 3150 NXT

Бренды по названию

Популярные бренды

Pentair FLECK 3150 NXT, Руководство по установке

Результаты поиска

Содержание FLECK 3150 NXT

Отзывы:

Похожие инструкции для FLECK 3150 NXT

Бренды по названию

Популярные бренды