38
EASYTOUCH
®
PL4/PSL4 Control Systems User’s Guide
Settings Menu: IntelliChlor
While the EasyTouch
®
PL4/PSL4 Control System is in normal operating mode (“Pool,” “Spa” mode or “Spa Fill
(Spillway),” it will control the IntelliChlor
®
Salt Chlorine Generator (SCG) chlorine output level. The amount of
chlorine introduced into the pool is determined by the amount of salt in the water, water temperature, and the
amount of time the pool pump is running in “Pool” mode. Note: While in “Freeze Protection” mode (see page
44), the IntelliChlor (SC) will not operate or produce chlorine during the time that the filter pump is operating.
For more information, refer to the IntelliChlor Salt Chlorine Generator User’s Guide (P/N 520589).
IntelliChlor
To setup the IntelliChlor
®
SCG:
MENU
s
SETTINGS
s
INTELLICHLOR
Right button:
Enable/Disable the IntelliChlor. SCG (To select SuperChlor, run hours,
press the
Up/Down
button -
2
/2).
Up/Down buttons:
Select
Yes
or
No
to enable or disable the IntelliChlor (SC).
Right button:
POOL Mode “50%” setting.
Up/Down buttons:
Set the chlorination output level for the pool water from 0 to
100%. EasyTouch PL4/PSL4 Control System will determine the chlorinator output
level when the system is operating in “Spa” or “Pool” mode. The amount of chlorine
introduced into the pool/sap is determined by the amount of salt in the water, water
temperature, and the amount of time the pool/spa operates in these modes mode.
Right button:
SPA Mode “0%” setting.
Up/Down buttons:
Set the chlorination output level for the spa water from 0 to 20%.
Right button:
Move to the next set of settings (2/2).
Up/Down buttons:
Select
2
/2.
Right button:
Move the Super Chlorination settings.
Up/Down buttons:
Set Super Chlorination
On
or
Off
. See note below about Super
Chlorination.
Right button:
Move to “Run Hours” setting.
Up/Down buttons:
Set the number of hours to run Super Chlorination. 24 hours is
the default setting. Run hours can be set from 0 to 72 hours.
Press the
Menu
button to save the settings and to return to the Settings menu
options. Press the button again to return to the main menu options or press again to
return to the main screen.
Note: For IntelliChlor (SC) status messages, see “Diagnostics: Chlorinator” page 58.
About Super Chlorination:
The Super Chlorination feature is used to introduce large amounts of chlorine
into the pool water if there has been heavy rain fall, many bathers in the pool, cloudy water conditions, etc.
When Super Chlorination is enabled, the system will switch on the filter pump, set the pool/spa valves to the
correct position, and set the IntelliChlor (SC) to maximum output. This process continues for 24 hours. At the
end of the Super Chlorination process, the pool will return to normal operation. It is possible to manually stop
the Super Chlorination process and switch off the filter pump using the Filter (F) button on the main control
panel at the pool equipment pad. When the filter pump is switched on again using the Filter (F) button, the
Super Chlorine process will resume for the duration of time left.
IntelliChlor 1/2
Enable: No
Level: 50%
IntelliChlor 2/2
Super Chlr: Off
Run Hours: 24
