EASYTOUCH
®
PL4/PSL4 Control Systems User’s Guide
27
Setting up lights
(Continued)
Config
From the “Config” screen you can setup the IntelliBrite light position, and specify the color of each pool and
spa light. Any combination of up to three (3) IntelliBrite
®
, S
Am
®
, S
AL
®
,
and/or FIBER
works
®
lights can be
preset for specific colors and position when using the “Color Swim” and “Color Set” feature. Fixed light color
are selected and activated from the Colors screen.
Note: The “Config” menu settings do not apply to the
MagicStream laminars.
To select configure a light position and color:
MENU
s
LIGHTS
w
CONFIG
Up/Down
buttons:
Choose the light circuit (1-3) to configure. Select an available
auxiliary circuit (NONE). For more about assigning an auxiliary circuit to a light,
see “Circuit Functions (page 44) and “Circuit Names” (page 42).
The system supports up to three (3) auxiliary circuits.
Right button:
Select the light to setup.
Up/Down buttons:
Select the light circuit.
Right
button:
Move to the light color selection.
Up/Down
buttons:
Select the light color (
Blue, Cyan, Green, Lt. Green,
White
,
Lt. Magenta
,
Magenta
,
Lavender
).
Right
button:
Move to the light position selection.
Setting up SAM, SAL, PG2000, Color Wheel Lights
Before using the lighting feature “Color Swim” or “Color Set” with SAM or SAL lights, make sure the AUX relay
circuits which control the lights have been assigned as “light” circuit and that the name (AUX 1, AUX 2, AUX 3)
has been changed to best fit the light being used. Verify that S
Am
and/or S
AL,
and/or FIBER
works
have been
assigned in “Circuit Functions” as SAM or SAL light. If FIBER
works
lighting is incorporated, it also has to be
set up as a “PHOTON GENERATOR” light for the circuit controlling the light bulb, and COLOR WHEEL for the
circuit controlling the color wheel it self. The circuit light “functions” are: Light, SAM, SAL, Photon Generator,
Color Wheel, and IntelliBrite lights, see page 45 for a complete list of Preset Circuit Functions.
Up/Down buttons:
Select the light position. A light can be assigned to any position
from 1 through 12. To ensure that the “Color Swim” and “Color Set” lighting feature
color effects are correct, set the position of the light according to where it’s located
in the pool or spa.
Position 1
will lead all the other lights in the color changing
sequence.
Position 2
follows Position 1 and so on. There are 12 position to
choose from. More than one light may be assigned to the same position number so
that their colors may be synchronized. For example, to make the colors swim right
to left, make your right most light Position 1. You may need to go back to and scroll
through your lights to find the right most light, and set it as Position 1.
Right button:
Move to the light delay selection. The Delay time between two or
more lights can be set from 0 to 60 seconds. Use a higher delay time for lights
spread further apart. Try five seconds for all lights and observe the effect. Use
different time settings to achieve unique lighting moods and effects.
Press the
Menu
button to setup other lights or press Menu button four times to
return main screen.
1- [POOL ]
2- [SPA ]
3- [BACK YARD ]
[ AUX 3 ]
[ MAGENTA ]
[ 1ST POSITION ]
[ DELAY 5 SECS ]
