INSTALLATION continued
5. Connecting the Faucet
CAUTION
Water supply to the tee should have a separate
shut-off valve. If it does not, a separate shut-off
should be installed.
A. Locate the 3/8" blue tubing from the faucet and place a
mark 5/8" from the end of the tubing. Moisten the end of
the tubing with water and insert into the quick-connect
fitting on the head assembly until the mark is flush with
the quick-connect fitting.
B. Gently pull back on the tubing to ensure it is connected
properly. If the tubing comes out of fitting, cut a small
section off of the tubing and reconnect.
NOTE: Tubing may be quickly and easily removed from
the fitting if necessary. First, turn off the water
supply to the filter. Open faucet, then press in
the collet around the fitting while pulling the
tubing with your other hand.
Step 8
A
3/8" Blue
Step 5
3/8" Red
Step 9
1/4" Red
1/4" White
Step 6
PW-S2500R
Yellow
PW-C5000R
Blue
PW-C2500R
Violet
Cover Not Shown
PW-RO75R
Green
1/4" Green
Step 11
Figure 8
Model PB4RO-75 Undersink Reverse Osmosis System JA12 • 7
Содержание PB4RO-75
