Pentair Pool Products PB4RO-75, Руководство пользователя

Страница: 6 / 22

INSTALLATION continued
4. Mounting the System
CAUTION
The filter head assembly should be mounted on
a stud or firm surface. The mounting bracket will
support the weight of the cartridges and help
prevent strain on the water lines.
A. Select location under sink or in basement where unit
is to be mounted. The head assembly is mounted in a
vertical position.
B. When mounting the PB4RO-75 two screws are
supplied to mount the head. Measure up from the floor
of the cabinet 14-1/2". This will provide clearance to
change the cartridges. The two screws will be 14" apart
and level. Screw the two screws into the wall. Leave a
gap between the screw head and the wall of 1/8". The
backside of the system head has two slots that will fit
over the screw heads and slide down to lock.
14 Inches
Between Holes
B
12 Inches
From Mounting
Hole to Bottom
of Cartridge
2-1/2 Inches Clearance Below Cartridges
Figure 7
6 • JA12 Model PB4RO-75 Undersink Reverse Osmosis System