Pentair Flotec HYDROBLASTER 2.5, Оригинальное руководство пользователя

Страница: 8 / 198

6
CHAPTER 4
CHECK BEFORE OPERATION
For your safety, and to maximize the service life of your equipment, it is very important to take a few moments befo -
re you operate the engine to check its condition. Be sure to take care of any problem you find, or have your servicing
dealer correct it, before you operate the engine.
Look around and underneath the engine for signs of oil or gasoline leaks.
Remove any excessive dirt or debris, especially around the muffler and recoil starter.
Look for signs of damage.
Check that all shields and covers are in place, and all nuts, bolts, and screws are tightened.
Check the engine oil level. Running the engine with a low oil level can cause engine damage. The Oil Alert system (ap -
plicable engine types) will automatically stop the engine before the oil level falls below safe limits. However, to avoid
the inconvenience of an unexpected shutdown, always check the engine oil level before startup. Check the air filter.
A dirty air filter will restrict air flow to the carburetor, reducing engine performance. Check the fuel level. Starting
with a full tank will help to eliminate or reduce operating interruptions for refueling.
Review the instructions provided with the equipment powered by this engine for any precautions and procedures
that should be followed before engine startup.
Before beginning your preoperation checks, be sure the engine is level and the engine
switch is in the OFF position.
IS YOUR ENGINE READY TO GO?
CHECK THE GENERAL CONDITION OF THE ENGINE
CHECK THE ENGINE
CHECK THE EQUIPMENT POWERED BY THIS ENGINE
Improperly maintaining this engine, or failure to correct a problem before operation, could cause a
malfunction in which you could be seriously injured. Always perform a preoperation inspection before each
operation, and correct any problem.
WARNING
EN