SGM700 Digitizer
Configuration Menu -CAL- -continue-
When a number is shown, the deletion of one calibration point is completed and
more points need to be deleted. Press key 3 >3 sec to do so.
>3 sec.
When all calibration points are deleted, the following screen is visible:
In
CAL 4
you can set a
Deadload compensation
.
In this menu, the deadload
can be set to pull the whole weighing line back to zero. The zero point could be
different because of some modification on the scale or dirt. Press key 2 <2 sec. to
set a new deadload compensation.
The following screen is visible:
Use key 1 and key 2 to enter the weight that is in/on the weigher. Key 1 is used
for changing the number (1-9), key 2 is used for changing the position of the
cursor. And press key 3 >2 sec.to set the new deadload.
Up
Down Left Right
Confirm
61